MAINTENANCE
5-8 EPT024619 Issue 1 June 2016
Automatic Nozzle Switching
The print head has 2 banks of nozzles. To increase the nozzle life, rather
than use both or 1 nozzle bank for every print, the G20i can alternate nozzle
banks for each print.
Set up Automatic Nozzle Switching using the Wireless USB
Keyboard
To set up this feature using the wireless USB keyboard:
(1) From the main menu, highlight Settings.
(2) Press the Enter button.
(3) Highlight Print Side.
(4) Press the Enter button.
(5) Highlight Select.
(6) Press the Enter button.
(7) Highlight Auto.
(8) Press the Enter button.
(9) Highlight Value.
(10) Enter the number of times 1 nozzle bank will print before switching to
the second nozzle bank.
(11) Press the Enter button.
(12) Press ESC to return to the main menu.
Set up Automatic Nozzle Switching using the PC
Note: This feature cannot be set up using a PC when printing at 600
DPI. Both nozzle banks are required for 600 DPI printing.
To set up this feature using the PC:
(1) Open the Domino G20i software.
(2) Open the Printer Control menu.
(3) In the Print-Head sub menu, change the Switch Nozzle Auto setting to
On.
(4) Change the Times value, to the number of times 1 nozzle bank will
print before switching to the second nozzle bank.
To Next Page
Loading...
Need help?
General
