OPERATION
3-56 EPT024619 Issue 1 June 2016
Shift Code
To insert a shift code into the message design:
(1) Place the cursor where the shift code is required.
(1) Select the Shift icon.
(2) 5 shift codes can be defined in the settings table:
(3) Select Insert to confirm the settings and return to the Message
Designer.
Setting Name Explanation
S.Code 0, 1 and
2
3 different time tables for shift codes can be defined
and saved. Select either S.Code 0, 1 or 2.
1st column Enter the name of the shift.
2nd and 3rd
Column
Enter the start time of the shift.
Save shift code Tick the Save shift code tick box to save the shift
code when Insert is selected.
Load shift code Tick the Load shift code tick box to load the shift
code when Insert is selected.
To Next Page
Loading...
Need help?
General
