OPERATION
3-28 EPT024619 Issue 1 June 2016
Time
Note: The printer’s system clock must be set up to print an accurate
time value. See “Set The System Clock” on page 6-33.
To insert the current time into the message design:
(1) Whilst creating a new message, place the cursor where the time
should appear.
(2) Press the Insert button on the keyboard.
(3) Move the cursor to highlight Time.
(4) Press the Enter button.
(5) Input the required time format into the Format text box:
(6) Press the Enter button.
Time format
character
Explanation
s or ss To show the seconds from 0 to 59.
m or mm To show the minutes from 0 to 59.
h To show the hours from 1 to 12.
hh To show the hours from 01 to 12.
H To show the hours from 1 to 24.
HH To show the hours from 01 to 24.
tt To show AM or PM.
To Next Page
Loading...
Need help?
General
