INSTALLATION
EPT024619 Issue 1 June 2016 6-45
Using an Android Device
To set the delay using an Android device:
(1) Open the Domino Printer G20i application on the Android device.
(2) Select printer settings.
(3) Select print delay.
(4) Change the Delay before print value to set the distance between
when the print trigger is activated, and the point when the message
will print. (5mm to 500mm)
(5) Change the Delay After value to set the distance between when the
message has finished printing, and when the next message will start
printing. (50mm to 500mm)
(6) Select Set.
To Next Page
Loading...
Need help?
General
