Emerson Micro Motion 1000 Series User Manual

174 Micro Motion Series 1000 and Series 2000 Transmitters
Flowmeter Installation Types and Components
B.3 Model 1700/2700 transmitters
B.3.1 Installation diagrams
Model 1700/2700 transmitters can be installed in four different ways:
•Integral
• 4-wire remote
• 9-wire remote
• Remote core processor with remote transmitter
See Figure B-8.
B.3.2 Component diagrams
Figure B-9 shows the transmitter and core processor components in integral installations.
Figure B-10 shows the transmitter components in 4-wire remote installations and remote core
processor with remote transmitter installations.
Figure B-11 shows the transmitter/core processor assembly in 9-wire remote installations.
In remote core processor with remote transmitter installations, the core processor is installed
stand-alone. See Figure B-12.
B.3.3 Wiring and terminal diagrams
In 4-wire remote and remote core processor with remote transmitter installations, a 4-wire cable is
used to connect the core processor to the transmitter’s mating connector. See Figure B-13.
In 9-wire remote installations, a 9-wire cable is used to connect the junction box on the sensor to the
terminals on the transmitter/core processor assembly. See Figure B-15.
Figure B-16 shows the transmitter’s power supply terminals.
Figure B-16 shows the output terminals for the Model 1700/2700 transmitter.

Emerson Micro Motion 1000 Series Specifications

General

Brand	Emerson
Model	Micro Motion 1000 Series
Category	Transmitter
Language	English