Emerson Micro Motion 1000 Series User Manual

Configuration and Use Manual 237
Model 1700/2700 IS Display CodesModel 2700 CIOModel 1700/2700 AN
Appendix G
Menu Flowcharts – Model 2700 CIO Transmitters
G.1 Overview
This appendix provides the following menu flowcharts for the Model 2700 CIO transmitter:
• ProLink II menus
- Main menu – Figure G-1
- Configuration menu – Figures G-2 through G-4
• Communicator menus
- Process variables menu – Figure G-5
- Diagnostics/service menu – Figure G-6
- Basic setup menu – Figure G-7
- Detailed setup menu – Figures G-8 through G-10
• Display menus
- Managing totalizers and inventories – Figure G-11
- Off-line menu: top level – Figure G-12
- Off-line menu: Alarms – Figure G-13
- Off-line maintenance menu: Version information – Figure G-14
- Off-line maintenance menu: Configuration – Figures G-15 through G-18
- Off-line maintenance menu: Simulation (loop testing) – Figure G-19
- Off-line maintenance menu: Zero – see Figure G-20
- Off-line maintenance menu: Meter verification – see Figure G-21
For information on the codes and abbreviations used on the display, see Appendix H.
G.2 Version information
These menus flowcharts are based on:
• Transmitter software rev5.0
• Enhanced core processor software v3.2
• ProLink II v2.5
• 375 Field Communicator device rev 5, DD rev 1
Menus may vary slightly for different versions of these components.

Emerson Micro Motion 1000 Series Specifications

General

Brand	Emerson
Model	Micro Motion 1000 Series
Category	Transmitter
Language	English