Emerson Micro Motion 1000 Series User Manual

Configuration and Use Manual 201
Model 1700/2700 IS Display CodesModel 2700 CIOModel 1700/2700 AN
Appendix E
Menu Flowcharts – Model 1700/2700 AN
Transmitters
E.1 Overview
This appendix provides the following menu flowcharts for the Model 1700/2700 AN transmitter:
• ProLink II menus
- Main menu – Figure E-1
- Configuration menu – Figures E-2 through E-4
• Communicator menus
- Process variables menu – Figure E-5
- Diagnostics/service menu – Figure E-6
- Basic setup menu – Figure E-7
- Detailed setup menu – Figures E-8 through E-8
• Display menus
- Managing totalizers and inventories – Figure E-11
- Off-line menu, top level – Figure E-12
- Off-line menu: Alarms – Figure E-13
- Off-line maintenance menu: Version information – Figure E-14
- Off-line maintenance menu: Configuration – Figures E-15 and E-16
- Off-line maintenance menu: Simulation (loop testing) – Figure E-17
- Off-line maintenance menu: Zero – Figure E-18
- Off-line maintenance menu: Meter verification – Figure E-19
For information on the codes and abbreviations used on the display, see Appendix H.
E.2 Version information
These menus flowcharts are based on:
• Transmitter software rev5.0
• Enhanced core processor software v3.2
• ProLink II v2.5
• 375 Field Communicator device rev 5, DD rev 1
Menus may vary slightly for different versions of these components. Some options (e.g., discrete
output) may not apply to Model 1700 transmitters. Those options will be unavailable when using a
Model 1700 transmitter.

Emerson Micro Motion 1000 Series Specifications

General

Brand	Emerson
Model	Micro Motion 1000 Series
Category	Transmitter
Language	English