J
After joining all the sheets, trim off the borders
by cutting along the cut guides (outside the X
marks).
Printing at Non-Standard
Sizes
Before printing at non-standard sizes, including
vertical or horizontal banners and documents with
equal sides, save the desired paper size in the printer
driver. Once they have been saved in the printer
driver, custom sizes can be selected in the application
Page Setup and other print dialogs.
Supported paper sizes
The following table shows the paper sizes that can be
set in the printer driver. See the following for paper
sizes supported by the printer.
U “Printable area” on page 61
Paper
Width
SC-P20000 Series: 210 to 1626 mm
SC-P10000 Series: 210 to 1118 mm
Paper
Height
Windows: 279.4 to 15,000 mm
Mac OS X: 279.4 to 15,240 mm
*
*For Mac OS X Custom Paper Sizes, although
you can specify a large paper size which cannot
be loaded on this printer, it will not be printed
properly.
c
Important:
When using commercially available software, the
possible output sizes are restricted. If you are
using applications that support banner printing,
you can set a longer paper length. See the
application's manual for details.
SC-P20000 Series/SC-P10000 Series User's Guide
Printing Varieties
100
To Next Page
Loading...
Need help?
General