Epson SC-P20000 SERIES User Manual

Maintenance
U “Maintenance menu” on page 128
Menu item Description
Nozzle Check Print Check Pattern Press Z to start printing.
Printless Nozzle Check Press Z to start checking.
Head Cleaning Select Nozzle & Level
Displays the combination of nozzle arrays.
Check And Clean Nozzle Press Z to start head cleaning.
Head Alignment Auto (Bi-D) Press Z to start printing/alignment.
Manual(Bi-D) Press Z to start printing.
Restore Settings Yes, No
Cutter
Maintenance
Adjust Cut Position -3 to 3mm
Replace Cutter Press Z to start move.
Transportation/Storage Press Z to start transporting/storing.
Setup
*1: Only displayed when the optional hard disk unit or Adobe PostScript 3 Expansion Unit has been connected.
*2: Only displayed when the optional Adobe PostScript 3 Expansion Unit has been connected.
U “Setup menu” on page 130
SC-P20000 Series/SC-P10000 Series User's Guide
Using the Control Panel Menu
118

Epson SC-P20000 SERIES Specifications

General

Brand	Epson
Model	SC-P20000 SERIES
Category	Printer
Language	English