Using the Paper Basket
The paper basket collects paper from the printer,
preventing it falling to the floor and becoming creased
or dirty.
Caution:
Do not place your hand into the parts of the
support bar marked with labels. Failure to
observe this precaution could result in your hand
being caught in the mechanism and being injured.
Note:
For details on installing the paper basket, see the Setup
Guide.
Usage Position
When using the paper basket, make sure the support
bar is in position B.
Note:
For other operations, we recommend moving the
support bar to the storing position.
The paper basket can only hold one sheet of paper at a
time, regardless of the paper type. The maximum size
is shown below.
Maximum size when one sheet is collected
Paper Width Paper
Length
Approx. 1,118mm/Super B0 portrait
Approx.
1,580 mm
Note:
Close the paper basket before printing banners or other
documents that exceed the maximum length. Before
the paper ejected from the printer touches the floor, we
suggest that you take it in both hands close to the
board paper support and continue to lightly support it
until printing is complete.
Storing the Cloth
Make sure you store the cloth for the paper basket
when using the auto take-up reel unit or moving the
printer.
SC-P20000 Series/SC-P10000 Series User's Guide
Basic Operations
56
To Next Page
Loading...
Need help?
General