D
Select the Media Type, Color, Print Quality,
Mode, and Source according to the paper
loaded in the printer.
E
Make sure you select the same Size as you set in
the application.
After making the settings, click OK.
F
When settings are complete, click Print.
The progress bar is displayed, and printing starts.
Screen while printing
The following screen is displayed when you start
printing, and the progress bar (the computer's
processing status) is displayed. On this screen you can
check the remaining ink level, product numbers for
the ink cartridges, and so on.
An error message is displayed if an error occurs or an
ink cartridge needs replacing while printing.
Printing (Mac OS X)
Make print settings such as paper size and paper
source from the connected computer and then print.
A
Turn on the printer, and load the paper.
U “Loading and Removing the Roll Paper” on
page 31
U “Loading and Removing Cut Sheets” on
page 38
U “Before Printing on Commercially
Available Paper” on page 197
SC-P20000 Series/SC-P10000 Series User's Guide
Basic Operations
58
To Next Page
Loading...
Need help?
General