❏ Remove any optional components if they are
installed.
To remove the optional components, see the
documentation included with each of them, and
then reverse the attachment procedure.
Furthermore, repack it using the original box and
packing materials to protect it from shock and
vibration.
When packing, make sure you install protective
material to secure the print head.
Caution:
❏ The printer is heavy. When you pack or move
the printer, use four or more people when
carrying it.
❏ When you lift the printer, maintain a natural
posture.
❏ When you lift the printer, place your hands at
the locations indicated in the following
illustration.
If you lift the printer while holding other
sections, you may be injured. For example,
you may drop the printer or your fingers may
be pinched when lowering the printer.
When you move the printer while packaging it, place
your hands at the positions in the illustration, and
then lift.
B
A
C
D
A D
B
C
c
Important:
❏ Only hold the required area; otherwise, the
printer may be damaged. Failure to observe
this precaution could damage the printer.
❏ Move and transport the printer with ink
cartridges installed. Do not remove the ink
cartridges; otherwise, the nozzles may be
clogged and make it impossible to print, or
ink may leak.
Notes when reusing the printer
Check the following points before using the printer
again after moving or transporting.
❏ Are the casters locked?
❏ Is the print head clogged?
U “Checking for clogged nozzles” on page 142
SC-P20000 Series/SC-P10000 Series User's Guide
Appendix
201
To Next Page
Loading...
Need help?
General