To sort the partial counters press , press again to define the sort direction (ascending,
descending).
2. Total counter
You can sort the error codes generated by the machine by frequency of appearance.
To sort the total counters press , press again to define the sort direction (ascending,
descending).
3. Sorting
Button used to define the direction of sorting (ascending, descending).
4. Error message codes
Classed by display frequency.
5. Error message pages
6. Description of selected error
Use the scroll box on the right of the message box to scroll through the text.
Press to return to the work screen.
6. MAINTAINING AND CLEANING THE EDGER
This section describes the maintenance and cleaning procedures for the edger:
• Precautions required (F p.176)
• Clean the door, the “small tools” module and the wheels (high-base and step bevel) (F p.176)
• Dress the wheels (F p.178)
a. Precautions required
To avoid any incidents, unplug the device before all cleaning operation.
• Clean the edger covers regularly: use a neutral detergent (e.g. washing-up liquid) diluted with water
on a soft cloth.
• Clean the touch screen with a dry rag: it should never be in contact with liquid (e.g.: water, alcohol,
window cleaner).
• Service the water recovery and filtration systems regularly.
• Never clean the machine with chemical products (e.g.: petrol, thinners, solvents).
• Never clean the machine elements (module, etc.) with a wet rag.
• No additive should be added to the water in the edger tank. Do not add pyridine.
b. Clean the door, the “small tools” module and the wheels
From the work screen of the edger , select > > to access the cleaning menu.
To Next Page
Loading...
Need help?
General