Essilor Pro-E 700 edger User Manual

Availability of the “Super Chamfer” by finish
FINISHING WHEEL
Not available
13. PERFORM A CHEMISTRIE TM JOB (PRO-E 700)
is a technical solution that, through a magnet system, allows you to superimpose
a pair of additional “CLIP” lenses on the “ophthalmic” lenses initially mounted on the customers’ frames.
Near vision
Blue light
Solar
3D Vision
a. Prerequisites
You must center and block the lens before placing it in the edger.
It is recommended to start systematically with the edging of the ophthalmic lenses
Prerequisite: the lens must be centered and blocked before placing it in the edger.
Pro-E 600_Pro-E 700 > v1 -10.18
72
USER MANUAL> II. EDGING A LENS

Essilor Pro-E 700 edger Specifications

General

Brand	Essilor
Model	Pro-E 700 edger
Category	Laboratory Equipment
Language	English