Search Criteria
Different criteria can be combined to search the database. They can be defined in the
search criteria available at the bottom of the screen.
When you access the search screen, the criteria that were last defined are still available
on the screen.
Note
If the red cursor is located on another field in the Search Criteria area, use the
←/→ arrow keys to move from one field to the previous or next one, until the red
cursor is positioned on the requested field.
Criteria Description
Timecode This restricts the search to the clips containing the timecode
specified in this field. The timecode search is not applied on
growing clips.
• To define a timecode, type the desired value when the
red text cursor is visible in that field.
• Use the BACKSPACE key to clear the last digit
entered.
Date from / to This restricts the search to clips created between these 2
dates specified in these fields.
• If only Date to field is defined, all clips created before
that date will be considered.
• If only Date from field is defined, all clips created after
that date will be considered.
• Use the BACKSPACE key to clear the last digit
entered.
• Press the TAB key again to move the cursor back to the
keywords list.
Level / Ranking This restricts the search to the clips with a ranking equal or
higher to the ranking defined in that screen.
• Press the LEFTARROW or RIGHTARROW key until
you reach the desired ranking.
• Press ENTER.
• The selected ranking is highlighted in green.
• Press the TAB key again to move the cursor back to the
keywords list.
OPERATION MANUAL Multicam LSM 12.05
7. Keyword Management 169
To Next Page
Loading...
Need help?
General
