Fuji Xerox ApeosPort-IV 3070 User Manual

Fax
4
4 Fax
182
Speed Dialing (Specifying a Destination Using an Address Number)
You can use address numbers to specify recipients. Register the address numbers for
speed dialing in advance.
When you specify address numbers, confirm that the corresponding fax numbers are correctly registered
on the machine. For information on how to register address numbers, refer to "5 Tools" > "Setup" >
"Add Address Book Entry" in the Administrator Guide.
Note • If you have entered an incorrect value, press the <C (Clear)> button and enter the correct
value.
• You can specify only fax recipients using address numbers for the Simple Fax service. The
numbers registered for the Internet Fax service and the IP Fax (SIP) service cannot be
specified.
1 Press the <Speed Dial> button, and enter a
4-digit address number.
Note • If you have entered an incorrect value,
press the <C (Clear)> button and enter
the correct value.
2 Press the <Start> button.
3 Confirm the destination displayed on the touch screen, and then select [Yes].
123
4
56
789
0#
C
<Speed Dial> button
123
4
56
789
0#
C
<Start> button

Fuji Xerox ApeosPort-IV 3070 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV 3070
Category	Copier
Language	English