Power Source
53
Product Overview
2
Switching the Power Off
The following describes how to switch the power off.
1 Before switching the power off, make sure that the machine has completed all copy or
print jobs. Then, make sure that the <Data> indicator is not blinking.
Important • Do not switch the power off in the following situations. If the power is switched off, the data
being processed may be erased.
• While data is being received
• While a job is being printed
• While a job is being copied
• While a job is being scanned
• When switching the power off, wait 5 seconds after outputs have been delivered.
2 Press the power switch to the [ ] position.
z
When the Finisher-B1 (optional) is installed
Important • Power off processing is performed internally on the machine for a while after the power is
switched off. Therefore, do not switch the main power off immediately after switching the
power off.
Note • When powering the machine on after it has been switched off, wait 15 seconds after the
touch screen has gone dark.
To Next Page
Loading...
Need help?
General
