5 Scan
278
Scan
5
z
@S2HOME - This is the template for the Scan to Home feature. Selecting this
template verifies a user and sends scanned data to the folder prespecified for the
user.
Note • The job template "@S2HOME" is displayed only when remote authentication is enabled, and
[Enabled] is also selected in [Status] under [Properties] > [Services] > [Scan to Home] on
CentreWare Internet Services.
• The job template name "@S2HOME" can be changed by the system administrator from
CentreWare Internet Services.
For information on how to use CentreWare Internet Services, refer to the help of CentreWare Internet
Services.
Go to
Use the numeric keypad to enter a 3-digit job template number. The job template then
appears at the top of the list.
Template Description
Displays the [Template Description] screen on which you can view the description of
the job template. This button is displayed only when a description has been added to a
job template.
Update Templates
Refreshes the information. If a created job template has not been displayed, selecting
[Update Templates] will display the job template.
Preview (Previewing the Scanned Images during a Scan Job)
You can preview the scanned images while scanning the document.
For more information, refer to "Preview (Previewing the Scanned Images during a Scan Job)" (P.264).
Color Scanning (Selecting an Output Color)
You can set the output color to scan a document.
For more information, refer to "Color Scanning (Selecting an Output Color)" (P.265).
2 Sided Scanning (Scanning Both Sides of a Document)
You can automatically scan both sides of a 2-sided document.
By setting the binding style, both sides are scanned in the same orientation.
For more information, refer to "2 Sided Scanning (Scanning Both Sides of a Document)" (P.265).
Original Type (Selecting the Document Type)
You can select the type of the document.
For more information, refer to "Original Type (Selecting the Document Type)" (P.267).
File Format (Selecting a File Format for Output Data)
You can select a file format for output data.
For more information, refer to "File Format (Selecting a File Format for Output Data)" (P.267).