11 Job Status
374
Job Status
11
When [Delete] is Selected
1 Select [Delete].
îš„Delete
Deletes the job.
Important • Once a job is deleted, it cannot be restored.
îš„Cancel
Cancels deleting the job.
When [Print] is Selected
1 Specify how to process the job after printing.
Note •
The screen shown on the right does not
appear if [Print Job Confirmation Screen] is
set to [Disabled] in System Administration
mode. If [Disabled] is selected, the machine
automatically deletes the job after printing
without displaying the confirmation screen.
For more information, refer to "5 Tools" >
"Stored File Settings" > "Print Job
Confirmation Screen" in the Administrator
Guide.
îš„Print and Delete
Starts printing the job. The job is deleted after it is printed.
îš„Print and Save
Starts printing the job. The job is not deleted after it is printed.
îš„Cancel
Cancels printing the job.
Sample Set
Before printing multiple sets of a document, you can first print one set for trial, and then
print the remaining sets from the machine.
The following describes how to print or delete jobs stored with the Sample Set feature.
For information on how to operate a Sample Set job, refer to the print driver's help.
Note • When [Save as Private Charge Print Job] or [Save as Charge Print Job] is selected in
[Receive Control] under [Charge/Private Print Settings], jobs will not be saved in [Sample
Set] under [Secure Print Jobs & More] even if you select [Sample Set] on the print driver.
For more information, refer to "5 Tools" > "Authentication/Security Settings" > "Authentication" >
"Charge/Private Print Settings" in the Administrator Guide.
1 Select [Sample Set].
To Next Page
Loading...
Need help?
General
