Fuji Xerox ApeosPort-IV 3070 User Manual

Control Panel
59
Product Overview
2
Control Panel
The following describes the names and functions of the components on the control panel.
No. Component Function
1 <Services Home> button Press this button to display the [Services Home] screen.
You can change the services displayed on the [Services Home] screen. For
more information, refer to "1 Before Using the Machine" > "Customizing the
Control Panel" > "Customizing the Button Layout" > "Services Home" in the
Administrator Guide.
2 Touch screen Displays messages required for operation, and buttons for various
features. You can directly touch the touch screen to instruct operations
and set features.
3 <Log In/Out> button Lights up when a user is authenticated in System Administration mode,
Authentication mode, or Accounting mode. Displays the User ID entry
screen for entering System Administration mode, Authentication mode,
or Accounting mode. Also press this button to exit these modes.
4 <Job Status> button Press this button to check or cancel the current job, to check or print
stored jobs, or to check completed jobs.
5 <Machine Status> button Press this button to check the machine status and meters, to check the
status of consumables, and to print reports.
Note • By pressing the <Machine Status> button when you exchange
consumables, you can make the output device exit Energy Saver
mode and check the latest status of the consumables.
6 <Energy Saver> button When the machine is not used for a while, it enters Energy Saver mode
to reduce power consumption. When Energy Saver mode is active, the
<Energy Saver> button lights up.
Press this button to enter or exit Energy Saver mode.
123
4
56
789
0#
C
123
456
789
10 11 12
13 14 15
16 17 18
19 20 21
22 23 24
123
4
56
789
0#
C
2425
2223 21 181920
1 2
34 5 6
14151617
9
10
8
7
111213

Fuji Xerox ApeosPort-IV 3070 Specifications

General

Brand	Fuji Xerox
Model	ApeosPort-IV 3070
Category	Copier
Language	English