Fax/Internet Fax Options
215
Fax
4
• If the number of pages of documents is smaller than the specified pages, the scanned
number of pages will only be combined and transmitted.
Note • This feature is not available for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Pages per Side].
2 Select [On].
Off
The Pages per Side feature is not applied.
On
Allows you to scan multiple pages of a document onto one side of a single sheet of
paper for fax transmission. Specify the number of pages in [Originals] to fit onto one
side of a sheet of paper.
Use [+] and [-] or the numeric keypad to specify the value.
Remote Folder (Using Remote Folder)
This feature allows you to send or receive confidential documents that you do not want
others to see.
Note • This feature is not available for the Server Fax service.
• The fax signal method and F code method are available in IP Fax (SIP). For the method to
use a remote folder using the F code method, refer to "F Code (Using F Code
Transmission)" (P.218).
• For IP Fax (SIP) using a VoIP Gateway, a remote folder using the Fax signal method is not
available. Only the F code method is available.
Sending to Folder (Fax Signal Method)
This feature allows you to send a file directly to a folder on the remote machine. The
file can be printed on the remote machine. To use this feature, you need the folder
number and passcode of the remote folder.
Secure Polling (Fax Signal Method)
This feature allows you to retrieve a file from a folder on a remote machine by sending
a polling request from your machine. To use this feature, you need the folder number
and passcode of the remote folder.
The retrieved file is stored in a folder on the machine. When a file is received in a folder,
the <Data> indicator lights up and a Folder Report is printed. The Folder Report lists
the folder number and name.
Important • You cannot use polling to retrieve files from multiple remote folders simultaneously.