Cleaning the Machine
101
Maintenance
3
1
Wipe the White Chute with a soft cloth moistened with water to remove any dirt, and then
wipe it with a soft, dry cloth.
z
Do not press the film with an excessive force as it can be easily damaged.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the film with a soft cloth moistened with a small amount of
neutral detergent.
2
Wipe the constant velocity transport glass with a soft cloth moistened with water to
remove any dirt, and then wipe it with a soft dry cloth.
z
Do not use cleaning agents other than water or neutral detergent.
z
If you cannot remove dirt easily, gently wipe the glass with a soft cloth moistened with a small amount of
neutral detergent.
Cleaning the Document Feeder Rollers
If the document feeder rollers become soiled, smudges may appear on copies, faxes, or
scanned documents and paper jams may occur.
To ensure clean copies at all times, clean the document feeder roller about once a month.
z
Do not use benzene, paint thinner, or other organic solvents. Doing so might damage paint or coating on
plastic parts.
z
Cleaning the machine with an excessive amount of water may cause the machine to malfunction or damage
documents during copying, faxing, scanning, or printing.
To Next Page
Loading...
Need help?
General
