Maintenance
94
Maintenance
3
3
Empty the container.
4
Insert the emptied hole punch waste container into the finisher until it stops.
5
Close the front transport cover, and then close the top transport cover of the finisher.
z
If the cover is not completely closed, a message will appear and the machine remains paused.
Replacing Stamp
If the machine offers the Fax service and the Stamp Kit (optional) is installed, replace the
stamp cartridge when stamp impressions start to fade.
z
Do not touch the ink pad of the stamp cartridge as the ink may be adhered to the pad. If it comes into
contact with your skin, wash immediately.
z
Problems caused by using consumables not recommended by Fuji Xerox are not covered by the maintenance
service contract.
z
Before using consumables, carefully read instructions and precautions on their packages.
z
We recommend always keeping spare consumables/periodic replacement parts in stock.
z
To order consumables, contact our Customer Support Center.
(Product Name: Stamp Replacement Kit, Product Code: F451)
To Next Page
Loading...
Need help?
General
