Scan Service Overview
361
Scanner Environment Settings
9
Scan to My Folder
When you select [Login to Remote Accounts] for [Login Type] and select [Enabled] for
[Scan to My Folder] using CentreWare Internet Services, you can forward scanned
documents to different recipients that corresponds to the login user.
z
For more information on configuration procedures, refer to "Configuration of Scan to My Folder" (P.367).
Store to USB
You can store the scanned data to a USB memory device when you insert the USB 2.0
memory device into the USB memory slot of the control panel of the machine. You can also
select data stored in the USB memory device and print the data directly.
z
For information on the Store to USB service settings, refer to "Configuration of Store to USB" (P.372).
Job Flow Scanning
You can execute a scan job using the job flow sheets for the scan documents. Create the
job flow sheets using Device Setup tool on the network.
z
For information on how to configure job flow scanning, refer to "Configuration of Job Flow Sheets" (P.376).
Store & Send Link
The machine can convert a scanned document into electronic form, store it in the hard disk,
and send a URL that indicates the location of the document.
z
This feature may not be available depending on the model or your machine configuration. For information,
contact out Customer Support Center.
z
To use the Store & Send Link feature, you need to configure the authentication settings.
z
For information on the Store & Send Link service, refer to "Configuration of Store & Send Link" (P.377).
Store to WSD
You can remotely scan the document and store the image by operating on thecomputer.
Using the control panel of the machine, you can also select a destinationcomputer on a
network to store the scanned data.
z
WSD stands for Web Services on Devices.
z
For more information on the Store to WSD service, refer to "Configuration of Store to WSD" (P.379).
To Next Page
Loading...
Need help?
General
