Configuration for Authentication
443
Authentication and Accounting Features
14
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select the group displayed as [DefaultGroup (Default)], and then select [Create/ Delete].
8
Set each item.
z
For more information on the change of the authorization group, refer to "Create Authorization Groups" (P.317).
9
Select [Close] repeatedly until the [Tools] screen is displayed.
10
Select [Close].
Creating an Authorization Group
Perform the following procedures to add authorization groups, if necessary.
1
Press the <Log In/Out> button.
2
Enter the system administrator's user ID with the numeric keypad or the keyboard
displayed on the screen, and select [Enter].
When a passcode is required, select [Next] and enter the system administrator's passcode,
and select [Enter].
z
The default user ID is "11111".
z
The default passcode is "x-admin".
3
Select [Tools] on the Services Home screen.
4
Select [Authentication/Security Settings].
5
Select [Authentication].
6
Select [Create Authorization Groups].
7
Select a group displayed as [(No Name)], and then select [Create/Delete].
8
Enter a group name into [Group Name].
9
Set the other items.
z
For more information on the authorization group settings, refer to "Create Authorization Groups" (P.317).
10
Select [Close] repeatedly until the [Tools] screen is displayed.
11
Select [Close].
To Next Page
Loading...
Need help?
General
