Cleaning the Machine
97
Maintenance
3
Cleaning the Interior (LED Printheads)
The following describes how to clean the interior (LED printheads) of the machine.
Normally, clean the LED printheads when you replace the waste toner container. However,
if you have image quality problems such as white or colored stripes appearing on copied or
printed outputs, clean the LED printheads.
z
Clean the LED printheads periodically when you replace the waste toner container.
1
Make sure that the machine is not operating, and open the front cover.
2
Turn the lock lever counterclockwise to unlock the waste toner container. While holding
down the tabs on the top of the waste toner container, lay the container down toward you
and then pull out the container upward at an angle.
To Next Page
Loading...
Need help?
General
