z
For more information, refer to "Changing the Paper Settings" (P.72).
îš„ Change Settings
Select this button, if you change the paper size for the tray or the setting of auto paper
selection.
When you load non-standard size paper in a tray, select [Custom Size], and specify the
width and length. When you load standard size paper in a tray, select [Auto Detect].
z
For information about paper types available on the machine, refer to "Loadable Quantity and Weight for Supported Paper" (P.48).
îš‹
Paper Size
When using Trays 1 to 4, you can load both standard size paper and non-standard size
paper. When you load non-standard size paper, select [Custom Size], and then set the size
in the X (width) direction and in the Y (length) direction. Set the size in X (width) direction
between 182 and 432 mm and the Y (length) direction between 140 and 297 mm in 1 mm
increments. Select [Auto Detect] to use the standard size paper.
îš‹
Paper Color
Set the color of paper. The paper color selected here is displayed as the paper color on the
[Paper Supply] screen.
îš‹
Auto Paper Select
Set the condition for Auto Paper selection. When the color mode selected is used, Auto
Paper selection is enabled. Select from [All Colors], [Color], and [Black & White].
Automatic tray selection means that a tray containing the appropriate paper is
automatically selected by the machine for copying or printing.
Customize Paper Supply Screen
Select whether or not the setting items specified in [Paper Size] or [Auto Paper Select] under
[Paper Tray Attributes] are to be displayed on the [Paper Supply] screen.
îš„ Disabled
Does not display the items specified in [Paper Size].
îš„ Size Detection
Displays the setting in [Paper Size].
îš„ Usage (Auto Paper Select)
Displays the setting in [Auto Paper Select].
To Next Page
Loading...
Need help?
General
