Appendix
646
Appendix
16
Printable Area
This section describes the area on paper that can be printed.
Standard Printable Area
The standard printable area is the area of a sheet of paper excluding the 4 mm margins on
the upper and lower edges of paper, and 2 mm margins on the right and left edges of
paper. For 13 x 18" paper (width of 330 mm), the printable area of the paper is the area
excluding the 3.5 mm left and right margins. The actual printable area, however, may vary
depending on the printer (plotter) control language.
Extended Printable Area
When you select the extended printable area setting for printing, you can expand the width
and length of the printable area to 291.0 x 476.6 mm and the print assured area to 289.0 x
423.4 mm. The area of paper you can print to, however, may vary depending on the size of
paper.
z
To extend the printable area, change the PCL print driver setting, or the [Print Area] setting on the touch
screen.
z
For more information on the setting method on the print driver, refer to the help provided for the print driver. For more information
on the setting on the control panel, refer to "Print Area" (P.229).
When the paper width is 12 inches (A3)
Printer
To Next Page
Loading...
Need help?
General
