z
To register the billing data, enable the Auditron feature for fax/Internet fax under Accounting in advance. For
details on how to enable the Auditron feature, refer to "Auditron Mode" (P.308).
z
Set the connection time for one unit charge in each of the time bands (daytime/night/ midnight) in [Billing].
For more information on how to set [Billing], refer to "Billing - Day Time, Billing - Night Time, Billing -
Midnight" (P.298).
z
The registered details can be confirmed by printing the Billing Data List. For information on how to print, refer
to "Billing Data List" (P.122).
1
Select [Fax Billing Data].
2
Select [Charge Rate per Unit].
îš„Charge Rate per Unit
This is a communication charge per unit. You can set a value from 0.1 to 255.9 seconds in
0.1 second increments.
3
Select [Change Settings].
4
Enter an amount with the keyboard displayed on the screen or the numeric keypad.
5
Select [Save].
Accounting/Billing Device Settings
You can configure accounting or billing device settings.
z
When an accounting or billing device is connected to the machine, be sure to set a password and that users
other than the system administrator do not disconnect the device by mistake.
z
The features described in this section may not appear for some models. Optional components or related
products provided by Fuji Xerox are required to use the features. For more information, contact our Customer
Support Center.
To Next Page
Loading...
Need help?
General
