190-02246-10 GI 275 Part 23 AML STC Installation Manual
Rev. 11 Page 5-84
5.9 Diagnostics
The Diagnostics page provides additional information useful for installation and configuration
troubleshooting.
5.9.1 VFR GPS
GPS Signal Strength
This displays information on the VFR GPS, including whether the antenna is connected, GPS signal
strength, and GPS coordinates.
5.9.2 AHRS & ADC
The AHRS/ADC page shows the values for the configured ADC and AHRS sensors. It also allows the
Flight Log to be downloaded to a connected USB drive.
5.9.3 Backup Battery Status
This displays the charge, temperature, and cell voltage of an installed backup battery.
Rundown Test Results
This displays the most recent Battery Rundown Test results.
Clear Test Results
This clears the most recent Battery Rundown Test results.
5.9.4 HSDB Status
The HSDB Status page shows the status of both GI 275 HSDB connections.
5.9.5 CAN Network
The CAN page provides CAN bus error and warning information for any devices connected on the CAN
bus network.
5.9.6 Temp/Pwr Stats
The Temp/Pwr Stats page shows the total number of power ups, operating hours, and CPU temperatures.
5.9.7 Discrete Inputs
The Discrete In page shows the status (Active/Inactive) of each Discrete Input and how it is configured.
5.9.8 Discrete Outputs
The Discrete Out page shows the status (Active/Inactive) of each Discrete Output. Connected and
configured outputs can be toggled Active and Inactive by touching the associated button. Active outputs
say “Active” in green lettering, while inactive or not configured outputs say “Inactive” in gray lettering.
To Next Page
Loading...
Need help?
General
