190-02246-10 GI 275 Part 23 AML STC Installation Manual
Rev. 11 Page E-5
Figure E-2 Airspeed Tape Arc Range Diagrams
E.3.2 Airspeed Tape Arc Range Example
Section 2 (Limitations) of the Beech Bonanza (A36) POH/AFM defines a white arc (61-124 KIAS), green
arc (68-167 KIAS), and a yellow arc (167-205 KIAS). As the white and green arcs overlap, they must be
entered in separately.
• Where there is no overlap in the POH/AFM defined white arc range, configure the WHITE tape to
this range (61-68 KIAS)
• Where there is overlap of the POH/AFM defined white and green arcs, configure the
WHITE/GREEN tape to this range (68-124 KIAS)
• Where there is no overlap in the POH/AFM defined green arc, configure the GREEN tape to this
range (124-167 KIAS)
• Because the POH/AFM defined yellow arc does not overlap any other arcs, configure the
YELLOW tape to this range (167-205 KIAS)
INCREASING IAS
GI 275
YELLOW
TAPE RANGE
GI 275
GRE EN
TAPE RANGE
GI 275
WHITE/GREEN
TAPE RANGE
GI 275
WHITE
TAPE RANGE
GI 275
RED
TAPE RANGE
Vne
Vno
Vfe
Vs1
Vs0
POH / AFM
Defined
Yellow Arc
POH / AFM
Defined
White Arc
POH / AFM
Defined
Green Arc
INCREASING IAS
GI 2 75
YELLOW
ARC RANGE
GI 2 75
GREEN
ARC RANGE
GI 2 75
WHITE/GREEN
ARC RANGE
GI 2 75
WHITE
ARC RANGE
GI 2 75
RED
ARC RANGE
Vmo
Vfe
Vs1
Vs0
POH / AFM
Defined
White Arc
POH / AFM
Defined
Thin White Arc
Airspeed Tape Arc Ranges
For Vne Aircraft
(Not to Scale)
Airspeed Tape Arc Ranges
For Vmo / Mmo Aircraft
(Not to Scale)