190-02246-10 GI 275 Part 23 AML STC Installation Manual
Rev. 11 Page 3-2
3.1 Materials and Parts
Equipment must be sourced from both Garmin and commercial vendors for installation of the GI 275. This
section provides a description of the equipment and the installation kits available from Garmin and also
commercially available parts and their requirements.
3.1.1 Garmin
GI 275 components and applicable installation kits are supplied by Garmin. Refer to the Aviation Price
Catalog on flyGarmin.com
for details once the selection for a particular aircraft installation is determined.
Refer to the latest revision of GI 275 Part 23 AML STC Equipment List (P/N 005-01208-42) for the
approved Mod Status of equipment. Engine sensors with Garmin part numbers listed in Table C-20 are
available from Garmin.
Table 3-1 GI 275 Units
Table 3-2 GI 275 Connector Kits
Notes:
[1] The -01 connector kit includes the same parts as the -00 kit, but has additional quantities for the
second connector present on the ADAHRS and ADAHRS+AP models.
[2] Included with -00 and -01 connector kits. Listed for reference only.
[3] Optional adapter for installing a GI 275 in a cutout for a Bendix/King KI 256.
Unit
Part Number
Unit Catalog
GI 275 Base 011-04489-00 010-01912-00
GI 275 ADAHRS, Class I & II 011-04489-10 010-01912-10
GI 275 ADAHRS, Class III & IV 011-04489-30 010-01912-30
GI 275 ADAHRS+AP, Class I & II 011-04489-20 010-01912-20
GI 275 ADAHRS+AP, Class III & IV 011-04489-40 010-01912-40
GI 275 Base NVIS 011-04489-60 010-01912-60
GI 275 ADAHRS NVIS 011-04489-70 010-01912-70
Connector Kit Part Number
GI 275 connector kit (GI 275 Base units) 011-04809-00
GI 275 connector kit 2 (GI 275 ADAHRS & AP units) 011-04809-01 [1]
Configuration Module 011-04038-00 [2]
KI 256 Adapter Kit 011-05285-00 [3]
To Next Page
Loading...
Need help?
General
