Moving and transporting the system
The system may overbalance or tip if tilted more than 10
degrees.
Do not exceed specified load ratings when mounting
equipment on the top of the machine or on any of the
side rails.
See "Attaching equipment to the top of the machine" and
"Specifications and theory of operation" for system load ratings.
Before transporting or moving the system, fold all display arms into
the system and put the flip-up shelf in the down position.
Tighten the
horizontal-positioning lock on the display arm. When using the brake
on an incline, be sure to lock the brake with the machine facing down
the slope.
WARNING
•
Aisys CS²
8-4 2067226-001
To Next Page
Loading...
Need help?
General
