Installing a cassette
1.
Using the liquid level indicator, check that the cassette is filled to
the appropriate level.
2. If using Aladin2, unlock the cassette handle before installing it in
the active bay.
3. Insert the cassette into the active bay until a click is heard,
ensuring the cassette is in the correct position.
4. Turn the lock on the handle to the horizontal position (Aladin2
cassettes only).
5. The cassette is properly inserted when the agent is identified on
the display. Make sure that the displayed agent matches the
cassette.
Store the cassettes in the cassette storage bay when they are not in
use.
Note
Aisys CS²
13-8 2067226-001
To Next Page
Loading...
Need help?
General
