System setup
Use System Setup to access menus and settings for Patient
Demographics, Screen Setup, Fresh Gas Usage, System Status,
Calibration, and Checkout.
System Status shows the status of gas supplies, electrical supplies,
and the software version.
See the "User maintenance" section for information on the
Calibration menu item.
See the "Preoperative tests" section for information on the Checkout
menu item.
Patient demographics
Use the Patient Demographics menu to access menus and settings
for Age, Ideal Weight, TV for Ideal Body Weight, and Set Vent by
Weight.
Screen setup menu
Use the Screen Setup menus to customize the screen view. Areas
of the screen can be customized to show specific information.
Screen Setup contains the Layout, Scales, Time and Date, and
More Settings
submenus.
Setting waveform fields
The waveforms can be set to show agent, CO2, flow, Paw, or set to
Off. If a waveform is set to the same value as another waveform, the
previously set waveform changes to off and is removed from the
screen.
1. Select System Setup - Screen Setup.
2. Select the Layout tab.
3. Select the desired waveform button and select the value from
the drop-down menu.
4. Select Close.
Setting digit fields
The digit field can be set to show gas supply, flow, spirometry loops,
gases, respiration, or agent. If the digit field is set to show agent and
no airway module is inserted, the digit field will be blank.
Note
3 Operation
2067226-001 3-13
To Next Page
Loading...
Need help?
General
