System configuration
Use the System Config.
menu to set default information for the
system. Use the System Config. menu to access menus and
settings for Colors, Units, Ventilator Settings, Alarm Settings,
Parameter Settings, Trends Setup, and Pages Setup.
Display settings
Use the Colors menu to set the default colors for waveforms, digit
fields, and trends.
Use the Units menu to set the default units for parameters and
currency.
Setting colors
Set Paw, Flow, Respiratory, and CO2 parameters.
1. From Super User mode, select System Config. and then
Colors.
2. For each parameter, select the desired color from the drop-down
list.
3. Select Back to return to the System Config. menu.
Setting units
Set Patient Weight, CO2, Gas Supply Pressure, Paw, and
Currency to the desired units. Currency is only available for
systems with the ecoFLOW option installed.
1. From Super User mode, select System Config. and then Units.
2. For each parameter, select the desired unit from the drop-down
list.
3. Select Back to return to the System Config. menu.
Ventilator settings
Use the Ventilator Settings menu to set the default user settings for
VCV Cardiac Bypass, Circuit Compliance, Sample
Compensation, and TV for Ideal Body Weight.
Setting ventilator defaults
1. From Super User mode, select System Config. and then
Ventilator Settings.
12 Super user mode
2067226-001 12-5
To Next Page
Loading...
Need help?
General
