Immediately discard the absorbent if it has changed color. If left
standing for several hours, absorbent may regain its original color
giving a misleading indication of effectiveness.
Read the absorbent manufacturer’s instructions completely before
using the product.
Removing a canister
1.
Hold the canister by the handle and push on the release latch to
unlock the canister.
AB.74p058
2. Remove the canister by tilting it downward and off the two
support pins.
Removing an EZchange canister
1. Hold the canister by the handle and push the canister cradle
release latch to unlock the canister cradle.
AB.75p088
2. Slide the canister up and out of the cradle.
8 Setup and connections
2067226-001 8
-7
To Next Page
Loading...
Need help?
General
