Operation
Printed in U.S.A. 99 50940411/G0219
Lift Arm Float
Make sure the bucket is lowered to the ground
before activating the lift arm float. Activating
float with an attachment raised will cause the lift
arm to fall rapidly to the ground, which can
cause severe injury or death.
Do not drive the machine forward with the lift
arm float activated. Damage to the machine and/
or loss of control can result.
To activate lift arm float:
1. Lower the attachment to the ground.
2. Press button (A, Fig. 93) on the right joystick to
activate float:
a. Press button (A, Fig. 93) momentarily to
apply float momentarily.
b. Press and hold button (A, Fig. 93) on the
right joystick for 5 seconds to activate
continuous float.
NOTE:
Indicator (B) in the multi-function display is
lit when the lift arm float is activated. Indicator (B)
blinks when momentary float is activated and is
continuously lit when continuous float is activated.
Press button (A) again to deactivate continuous
float.
Fig. 93 – Lift Arm Float Buttons/Indicator
A
A
B
To Next Page
Loading...
Need help?
General
