Safety
50940411/G0219 30 Printed in U.S.A.
Safety Decals
• The machine has decals that provide safety infor-
mation and precautions. These decals must be
kept legible. If missing or illegible, they must be
replaced promptly. Replacements can be obtained
from your dealer.
• Refer to the Parts Manual for decal part numbers
and ordering information.
New Decal Application
• Surfaces must be free of dirt, dust, grease and
foreign material before applying the decal.
Remove the smaller portion of the decal backing
paper and apply the exposed adhesive to the
clean surface, maintaining proper position and
alignment. Peel the rest of the backing paper and
apply hand pressure to smooth out the decal sur-
face. Refer to the following pages for proper
decal locations.
• If replacing a part that has a decal on it, ensure
that the replacement part has the same decal.
Front
View from Operator’s
Position
Back - Engine
Compartment Open
C
F
D
H
G
E
I
A
B
Fig. 4 – Safety Decal Locations
On bottom of raised
platform
C
J
To Next Page
Loading...
Need help?
General
