Printed in U.S.A. 35 50940411/G0219
Specifications
Fluids/Lubricants Types and Capacities
NOTE: Capacities shown are approximate.
Table 2: Fluids/Lubricants Types and Capacities
Component/
Application
Type
Quantity
RT175 (with
interim Tier
4 Engines)
RT210 (with
interim Tier
4 Engines)
RT175 (with
Tier 4
Engines)
RT210 (with
Tier 4
Engines)
RT250
Hydraulic Oil Tank
HVLPD 46 (HYD0530)
Biodegradable oil: AVILUB Syntofluid
46; PANOLIN HLP Synth 46
41.6 L
(11 gal.)
52.2 L
(13.8 gal.)
41.6 L
(11 gal.)
52.2 L (13.8 gal.)
Hydraulic System –
Total
70.0 L
(18.5 gal.)
81.4 L
(21.5 gal.)
70.0 L
(18.5 gal.)
81.4 L
(21.5 gal.)
82.6 L
(21.9 gal.)
Grease Fittings, Lift
Arm
Lithium-saponified, brand-name multi-
purpose grease MPG-A
As required
Battery Terminals SP-B acid-proof Grease As required
Diesel Fuel Tank
ASTM D975 with biodiesel content
limited to 5% of DIN EN14214 type
(no additives allowed!)
90.8 L (24.0 gal.)
LSD or ULSD
1
low sulfur or
ultra-low sulfur, below 500
PPM.
1. Ultra-Low Sulfur Diesel (ULSD) fuel lubricity must have a maximum scar diameter of 0.45 mm, as measured by ASTM D6079
or ISO 12156-1, or a minimum of 3100 grams as measured by ASTM D6078. Contact your fuel supplier for details. Specifica-
tion 1-D S15 or 2-D S15, ASTM D975.
90.8 L (24.0 gal.)
ULSD
1
ultra-low sulfur only, below 15 PPM.
Engine Coolant
Long life coolant ASTM D4985, D6210
(United States)
SAE J814C, J1941, J1034 or J2036
(international)
(See “Coolant Compound Table” on
page 39)
13.2 L
(3.5 gal.)
14.4 L
(3.8 gal.)
13.2 L
(3.5 gal.)
14.4 L
(3.8 gal.
19.3 L
(5.1 gal.)
Radiator Cap Pressure 0.90 bar (13 psi)
Air Conditioning
(option)
R 134a refrigerant 1134 g. (2.5 lbs.) @ 24° C (76° F)
Final Drives:
Motor Gearbox
Shell transaxle (synthetic fluid) or
equivalent
SAE 75W90
1 L (1.06 qts.) +
10%
SAE 80W90
0.8L (0.85
qts.)
Engine Oil (with
filter)
IMPORTANT:
Model RT210 with
4TNV98CT-NMSL
Tier 4/5 engines: 0w-40 Full
Synthetic
All machines EXCEPT Model RT210
with
4TNV98CT-NMSL Tier 4/5
engines
: Refer to the Engine
Operator’s Manual for specific oil
recommendations and additional
information.
Service Classification: API-CK-4
preferred; API-CJ-4 acceptable
10.4 L (11 qts.)
8.9 L
(9.5 qts.)
To Next Page
Loading...
Need help?
General
