Gehl RT210 User Manual

Operation
Printed in U.S.A. 83 50940411/G0219
NOTE: “EXIT” selection (G) returns the display to
the configuration screen (Fig. 68).
4. With box (H) around the regeneration inhibit
symbol, press and hold the interface button until
the regeneration inhibit symbol blinks.
5. Press and release the interface button to move
box (H) around the “EXIT” selection (G). Press
and hold the interface button until the
configuration selection screen displays.
NOTE:
When DPF regeneration is inhibited, DPF
regeneration icon (J, Fig. 70) is displayed at the
bottom of all status screens.
If reset regeneration attempts to start but DPF
regeneration is inhibited, a flashing DPF
regeneration request icon (L) is displayed.
CAUTION
Permanently inhibiting regeneration is not
recommended, as this will eventually cause
significant reduction in engine power and will
force premature DPF filter core replacement.
Cancelling Regeneration Inhibit
1. Hold down the interface button (Z, Fig. 71) on
the multi-function display until the DPF Regen-
eration configuration selection screen (Fig. 72)
displays.
2. Press and release the interface button until the
selection caret points to the
selection (Y,
Fig. 72). Press and hold the interface button until
the DPF Regeneration Configuration (Fig. 72)
screen displays.
3. Cancel regeneration inhibit using one of the
following two methods:
Method A:
A-1. Press and release the interface button to
move box (H, Fig. 73) around the regenera-
tion inhibit symbol, as shown Fig.73.
195° F
Fig. 70 – DPF Regeneration Inhibited
J
L
Fig. 71 – Multi-Function Display Interface Button
Z
Fig. 72 – DPF Regeneration Configuration
Selection
Y
EXIT
H
G
Fig. 73 – DPF Regeneration Inhibit Selected

Gehl RT210 Specifications

General

Brand	Gehl
Model	RT210
Category	Compact Loader
Language	English