Printed in U.S.A. 69 50940411/G0219
Operation
Read and understand this entire manual. Follow
warnings and instructions for operation and
maintenance. Failure to follow instructions can
result in injury or death.
Read and understand all safety decals before
operating the machine. DO NOT operate the
machine unless all factory-installed guards and
shields are in place.
Be sure you are familiar with all safety devices
and controls before operating the machine.
Know how to stop the machine before starting.
Use only Manitou-approved accessories or
referral attachments. Manitou Group cannot be
responsible for safety if the machine is used
with non-approved accessories or attachments.
Check for correct function after adjustments or
maintenance.
Operational Checks
Pre-Start Checks
Complete these checks before starting the engine
and using the machine. Repair any problems before
using the machine.
Table 31: Pre-Start Checks
Check Refer To:
Fuel tank filled?
“Adding Fuel” on
page 135
Engine oil level correct?
“Checking Engine Oil
Level” on page 127
Hydraulic system oil level correct?
“Checking Hydraulic Oil
Level” on page 138
Engine coolant level correct?
“Checking Coolant Level”
on page 131
Windshield washer reservoir
filled?
“Windshield Washer
Reservoir” on page 161
Grease fittings properly
lubricated?
“General Lubrication” on
page 147
V-belt condition good/tension
adjustment correct?
“Checking and Adjusting
Belt Tension” on
page 133
Track condition good?
Lights, signals, indicators,
warning lights, indicators and horn
operating properly?
“Work Lights” on page 67
Windows, lights and steps clean?
Attachment securely fastened to
hitch?
“Connecting Attachments”
on page 104
Overall machine condition
(including attachments) for bends,
cracks, broken or missing parts,
etc.
Engine cover securely closed and
latched?
“Engine Access” on
page 126
Rags, tools, debris and other
loose objects removed? (check
especially after maintenance)
Approved warning triangle,
hazard warning light and first aid
kit in the machine?
If required by local
regulations
Seat position correctly adjusted?
“Seat and Armrest/
Joystick Console
Adjustment” on page 73
Armrests/joystick consoles
correctly adjusted?
“Armrest/Joystick
Console Adjustment” on
page 63
Seat belt fastened? “Seat Belt” on page 73
Parking brake applied?
“Parking Brake” on
page 74
Table 31: Pre-Start Checks
Check Refer To: