Driving and operating 189
• Ensure the clutch pedal is
completely pushed to the oor.
• Do not use the pedal as a foot
rest.
Caution
Do not drive with your hand
resting on the shift lever.
Manual transmission
• To engage reverse gear, pull the
ring on the shift lever upwards
then engage the gear.
• Do not engage reverse gear
while the vehicle is moving.
• If the gear does not engage,
move the shift lever to neutral,
release the clutch pedal, press
the clutch pedal again then
repeat gear selection.
7. Press the ignition key into
the slot.
8. Move the shift lever to N.
9. Remove the key from the slot.
10. Replace the cap.
11. Have the vehicle repaired by
a Holden Dealer as soon as
possible.
To Next Page
Loading...
Need help?
General
