214 Vehicle care
Brake uid
Warning
Brake uid is poisonous and
corrosive and will damage the
paint îš¿nish of the vehicle if spilt.
Caution
Avoid contact with eyes and
skin. Wash any affected area
immediately.
Checking brake uid level
The level should be between the
MIN and MAX area.
If the uid level is correct, do not
remove the reservoir cap, as brake
uid exposed to the atmosphere will
quickly absorb moisture.
Adding brake uid
See Recommended uids, lubricants
and parts on page 249.
1. Turn the ignition off.
2. Wipe the sides of the cap clean.
3. Rotate the brake uid reservoir
cap anticlockwise and remove.
4. Top up with the recommended
brake uid.
Warning
Using brake uid other than GM
recommended brake uid may
cause corrosion to components
of the braking system and
reduced braking performance.
Use only new brake uid. Use of
old, used or inferior brake uid
may endanger the functioning of
the brake system.
5. Secure the cap and clean up any
spilt uid.
If the brake uid requires regular
topping up, contact a Holden Dealer
immediately.
Caution
Do not dispose of used brake
uid with household waste.
Use the local, authorised waste
management facility.
To Next Page
Loading...
Need help?
General
