Seats, restraints 33
To fold the rear seatbacks down:
1. Unbuckle the seat belts.
2. Push the head restraints down
by pressing the locking button.
3. Slide the front seat forwards.
4. Adjust the front seatback to an
upright position.
5. Pull the release lever on top
of the rear seatback and fold it
forwards and down.
6. Place the seat belts into the belt
guides.
To return the seatback to the upright
position:
1. Pull the seat belt away from the
belt guides.
2. Lift the seatback upwards and
push îš¿rmly back into place.
Note
• Ensure the seat belts are
clear of the latch.
• The centre rear seat belt
may lock when raising the
seatback. Let the belt retract
then extend it.
Seat belts
Warning
Seat belts are designed to bear
upon the bony structure of the
body, and should be worn low
across the front of the pelvis or
the pelvis, chest and shoulders,
as applicable; wearing the lap
section of the belt across the
abdominal area must be avoided.
Seat belts should be adjusted as
îš¿rmly as possible, consistent with
comfort, to provide the protection
To Next Page
Loading...
Need help?
General
