74 Lighting
Headlamp high/low beam
To activate high beam:
1. Turn the headlamps on.
2. Push the lever forwards.
The high beam indicator lamp
P illuminates on the instrument
cluster.
To return to low beam:
1. Pull the lever rearwards.
Warning
Always switch the headlamps
to low beam when vehicles are
approaching or when following
another vehicle.
To ash the high beam lamps:
1. Pull the lever towards the rear of
the vehicle and release.
The lamps stay on for as long as
the lever is held.
Hazard warning ashers
Press ¨ to turn the hazard warning
asher on or off, when the ignition is
in any position.
All turn signals ash continuously.
Use the hazard warning asher if
the vehicle becomes a trafîš¿c hazard,
day or night.
Note
Using hazard warning ashers while
the vehicle is moving, is illegal in
some States and Countries.
To Next Page
Need help?
General
