188 Driving and operating
Fault
In the event of a fault, Z illuminates.
The transmission no longer shifts
automatically or manually because it
is locked in a certain gear.
Contact a Holden Dealer.
Interruption of power supply
If the power supply is interrupted,
the shift lever cannot be moved out
of position P.
If the battery is discharged, start the
vehicle using jump leads. See Jump
starting on page 237.
If the battery is not the cause of
the fault, release the shift lever and
remove the ignition key from the
ignition lock.
Release shift lever
Before shifting out of P:
1. Turn the ignition on.
2. Press the brake pedal to the oor.
If you cannot shift out of P with the
ignition on and the brake pedal
pressed:
3. Turn the ignition off and remove
the key.
4. Press and hold the brake pedal.
5. Pull up on the park brake lever.
6. Remove the cap on the centre
console with a thin object such
as a at-blade screwdriver.
To Next Page
Loading...
Need help?
General
