Vehicle care 221
Number plate lamp
1. Prise the lamp out with a
screwdriver.
2. Remove the bulb housing by
pulling downwards.
Do not pull on the cable.
3. Rotate the bulb holder
anticlockwise to disengage.
4. Remove the bulb from the holder.
5. Insert a new bulb.
6. Insert the bulb holder into
the bulb housing and rotate
clockwise.
7. Insert the bulb housing and
secure using a screwdriver.
8. Check lamp operation.
Interior lamps
Load compartment lamp
1. Using a at-blade screwdriver,
prise the lamp assembly
outwards.
To Next Page
Loading...
Need help?
General
