Vehicle care 231
5. Remove the electrical connection
cable (1) and air hose (2) from
the underside of the compressor.
6. Place the switch on the
compressor to O.
7. Screw the compressor air hose
to the connection on the sealant
bottle.
8. Connect the compressor plug
to the accessory socket (power
outlet).
9. Start the engine and let it idle
to ensure the battery does not
run down.
Warning
Do not run the engine in
an enclosed area or with
passengers in the vehicle. See
Fuel on page 199 for exhaust gas
warnings.
10. Place the compressor near the
tyre so that the sealant bottle is
upright.
11. Unscrew the valve cap from the
defective tyre.
12. Screw the îš¿ller hose to the
tyre valve.
To Next Page
Loading...
Need help?
General
