SAFETY AND SECURITY
Part No.: 4417340 Revision 1 Service Manual 3
954 SmartServo FlexLine
2.3 Safety Instructions
Safety Instructions
See the safety instructions shipped with the device for installation,
commissioning, operation, and maintenance.
EC Declaration of Conformity (for EU)
Refer to the EC declaration of conformity shipped with the device.
Control Drawings for FM & CSA
Refer to the control drawings shipped with the device.
Users
The mechanical and electrical installation must be carried out only by
trained personnel with knowledge of the requirements for installation of
explosion-proof equipment in hazardous areas.
The entire installation procedure must be carried out in accordance with
national, local, and company regulations.
The entire electrical installation shall be carried out in accordance with
the national requirements for electrical equipment to be installed in
hazardous areas.
Additional Information
If you require additional information, contact Honeywell or its
representative.
Environmental Conditions
Observe the environmental conditions for the temperature and the
pressure.
To Next Page
Loading...
Need help?
General
